-40%
Color Blender Lock Down Clear low 2.1 voc, Ready to Spray, Quart, SMR-3500LV-Q
Color Blender Lock Down Clear low 2.1 voc, Ready to Spray, Quart, SMR-3500LV-Q

Color Blender Lock Down Clear low 2.1 voc, Ready to Spray, Quart, SMR-3500LV-Q

$ 13.2

Availability: 204 in stock
  • Return shipping will be paid by: Buyer
  • California Prop 65 Warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov.
  • Brand: Speedokote
  • Restocking Fee: 20%
  • Refund will be given as: Money Back
  • Condition: New
  • Paint Volume: 1qt.
  • Manufacturer Part Number: SMR-3500LV-Q
  • Primary Color: Clear
  • Returns Accepted: Returns Accepted
  • Item must be returned within: 30 Days

    Description

    This sale is for Color Blender Lock Down Clear low 2.1 voc, Ready to Spray, Quart, SMR-3500LV-Q
    Color Blender is a universal blending product that can be used as a wet-bed sealer, lockdown
    clear, mid-coat for tri-coats, graphics and basecoat blender. This blending
    agent is compatible with most basecoat systems.
    APPLICATION:
    MIXING:
    RTS (Ready to Spray) No mixing Required.
    As a Color Blender - Apply 1-2 light to medium coats of blender mixture onto blend area, extend second coat beyond first coat.
    Allow 5-10 minutes flash between coats.
    Allow 15-20 minutes dry time at 70F before clearcoating. Caution: In all cases avoid high film builds of Basecoat and SMR-3500LV Color Blender
    As a Lock Down Clear - Spray 1 light to medium coat of SMR-3500 LV with no color added (before or after color application), to
    lock down the metallic or pearl color prior to clearcoat application. Allow 5-10 minutes between coats.
    Allow 15-20 minutes dry time at 70F before clearcoating.
    Health and Safety:
    See Material Safety Data Sheet and labels for additional safety information and handling instructions.
    The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and MSDS’s of all components, since
    the mixture will have the hazards of all its parts.
    Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury.
    Follow spray equipment manufacturer’s instructions to prevent personal injury or fire.
    Provide adequate ventilation for health and fire hazard control.
    Follow company, product MSDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory
    requirements.
    Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS.
    Always observe all applicable precautions and follow good safety and hygiene practices.
    Not for sale in California, Maryland and Delaware